Application cases of machine vision

Time:2017-09-20    Article published:Web【BACK】

The whole system requires a long time working and has high requirements on the reliability of the master control device. The master control device is installed in the terminal complete machine system, and the terminal complete machine system is generally placed in a work shop with an automatic transmission system, Dust and other harsh environments


System Requirements:

The whole system requires a long time work, higher requirements on the reliability of the main control equipment;

The main control equipment industrial computer is installed in the terminal complete machine system. The terminal complete machine system is generally placed in the work shop with an automatic conveying system, which is greatly affected by the harsh environment such as vibration and dust.

Because of the small number of data to be collected, there are not many interfaces that need to be expanded, generally 1-2.

Because you want to print the test results, so you need to print interface;

Because of the need to debug equipment, set parameters, display results, etc., so VGA interface, PS2 interface (separate) is a must;

Because of the need to connect some PLC control equipment, so COM port is also necessary;

Because the test process if found abnormal, must require timely alarm, so the motherboard must be buzzer, the detection process will generally use this buzzer;

Master control system to complete the collection of information, processing, analysis, transmission and communication functions, CPU performance can not be too low, but generally do not require too much, apply.

System specification:

Equipment to detect the quality of the surface of the PCB (such as surface defects, open circuit and short circuit) for the quality inspection of semi-finished products in the production process is the key technology of high precision single-layer PCB, especially multi-layer PCB processing. Test system integrates optics, precision machinery, recognition and diagnostic algorithms and computer technology in one. At the time of inspection, the machine aut